Wheel-speed record number of meters ZN96-C Encoder pulse Intelligent Counter

ZN96-C Wheel-speed record number of meters Encoder pulse Intelligent Counter Product Description   Application  1. For inspection machine, rolling machine, shaping machine and need to measure the length of the cable mechanical equipment is mainly used in textile, cables, paper and otherwire, wire, tube and strip production process automatic length measuring meter circle and control.
2. Since the sensor is reversible photoelectric sensor, to overcome the mechanical measuring device due to mechanical wear or slippage caused by low life, low precision ills, accuracy is significantly improved than mechanical counter, plus or minus 0. 2%, and stable performance, anti-jamming ability, simple and intuitive operation display. The intemal design of high-performance products and negative direction discrimination circuit, photoelectric encoders, enabling length measurement in both directions, that is both superposition meter can also reverse reduction meter
3. By changing the setting coefficient, the measurement results can be arbitrarily trimmed so that the measured value display is consistent with the actual value. It does not require the manufactuning precision encoder wheel sensor or user sampling round, as almost any dameter. So easy to install, but will also reduce the error caused by the installation Is applicable to any type, meter any occasions.   The structural characteristics and main technical specifications  1. Length measurement and length control range: 00000.0-99999.9m, 0000.00-9999.99m, 000000-999999m. Display unit centimeter, decimeter, meter, code arbitrary switching settings!
2. Reversible bidirectional meter.
3. Pulse equivalent: 0.00001-99.9999 adjustable.
4. Error Adjustment Function.   The main function  1. Reversible counter: When the measured object plus a forward motion, reverse motion reduction, no change to the error.
2. With a blackout of information protection. After the power failure, the original set number and current count value to keep the state before power failure, after power is restored, then the state of the instrument before power continue to work.
3. Fixed-length output: When the meters set when the count value (can be set to two different values),the instrument signal output contact (NCNC), normally closed contacts can be connected directly to the control device to stop or cut other implementing agendes, the police, etc, then the normally open contacts can control the machine start or electricity, alarm connected to the normally open contact, a few meters to reach the set alarm, alarm duration 0.. 9 seconds in any setting, two relay output action model of combining any setting. 4. By setting the advance waming alarm functions, such as 9 meters alarm after 5 seconds to reach up to 10 meters meter automatically cleared to re-meterl.
5. The extemal Terminal is cleared by an external Switch operation clears the count display.
6. The count value, the coefficient values can be set flexibly in production parameters unchanged, one can set the number of long-term work.   Technical characteristics of ZN96 meter counter Power supply: AC/DC 100-250V
Auxiliary output power: DC12V, 200mA
Size: 96*48*72
Input signal: L≤2V; H≥30uS(30k CPS)
Output response time: count arrival relay output time ≤ 3mS 
Dimensions: 48*96*75mm Power consumption: less than 4W Capacity:AC220V 3A/DC24V 5A Reset pulse signal: L≤2V; H≥4mS
Input impedance: 4.7K
Environment: 0-60℃; humidity≤85% Storage temperature: -20~85℃
Installation method: snap-in   Product photo One unit include Counter+Rotary Encoder+Encoder holder+Full Metal wheel      Main Products Company Information   FAQ Q:How to order our product? 
A: 1) Please tell us the model and quantity and other request you need. 
     2) We make the PI for you.
     3) After you confirm the PI, we arrange the order for you after receiving your payment.
     4) After the goods finished, we send the goods out to you and tell you the tracking number.
     5) We will track your goods until you receive the goods. Q:About company?
A:Established in 2007, and have got great success with its professional working team, we has been specialized in digital products for over 10 years, and mainly about HMI, PLC Encoder sensor and other industrial control products. Q:Where is your company located? How can I visit there?
A:Our factory is located in wenzhou, China, about 2 hours ride from wenzhou Airport. All our clients, from home and abroad, are warmly welcome to visit us! Q: What's your shipment method?
A: We ship by Express, by air, by sea, by train. Normally we checked and compare, then provide customer the most proper shipment method. Q: If I want to release order, what's the payment method you accept?
A: We accept T/T, Paypal, Western union, L/C. Q: If I want to release order, what's the process?
A: Thanks. You can send inquiry to us by alibaba, or send us by email, we will reply with in 24hrs. Q:What kind of packing do you send?
A:We use high-quality corrugated paper packing box, internal environmental protection buffer material.   Thank you & Now pls send your kindly inquiry ! ^!^

Contact us if you need more details on meter Counter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Length Counter、Electronic Digital Counter. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Counter